Scope of Delivery:
- 1x BENNING current clamp multimeter 0.01 - 1500 A
- Delivery incl. bag, test leads, batteries (2 x type AA) Spare battery see art. 4000 901 811
Product Description:
illuminated 4-digit digital LCD display (6000 dots) - for professional use in industry, service and trade - continuity test - diode test - data logger and memory function (4000 measured values) - Bluetooth® Low Energy 4.0 interface for measured value transmission - free IOS and Android app BENNING MM-CM Link for downloading, saving and sharing measured values via smartphone/tablet. AutoV function with low input impedance (LoZ) for suppressing reactive voltages - Inrush current measurement (INRUSH) - Low-pass filter (HFR high-frequency suppression, 800 Hz) for measurements on switched motor drives - Measurement input for flexible current transformer BENNING CFlex 1 to 3000 A AC (optional accessory) - Voltage sensor for non-contact phase and cable break testing (red LED) - Measuring range selection, Switch-off, battery undervoltage display automatic - Instantaneous value memory Hold - Minimum/maximum value memory MIN/MAX - LED measuring point illumination - Measuring circuit category Cat IV 600 V, Cat III 1000 V Measuring ranges: AC voltage (0.1 V - 1000 V), DC voltage (0.1 mV - 1000 V), AC/DC current 0.01 A - 1500 A, resistance 0.1 Ω - 600 kΩ, frequency 0.01 Hz - 10 kHz, capacitance 0.1 μF - 1 mF
Technical Data:
- Width: 86mm
- Length: 254mm
- Pliers opening: 42mm
- Height: 48mm
- Measuring method: TRUE RMS
- Measurement category: CAT IV 600 V, CAT III 100 V
- Measuring range: 0.01 - 1500 A
- Brand: BENNINGNote on the disposal of batteries and rechargeable batteries As we sell batteries and rechargeable batteries or devices containing batteries and rechargeable batteries, we are obliged under the Battery Act (BattG) to draw your attention to the following: The symbol of the crossed-out dustbin on batteries or accumulators means that they must not be disposed of with household waste after use. If batteries or accumulators contain mercury, cadmium or lead, you will find the respective chemical symbol (Hg, Cd or Pb) below the symbol of the crossed-out dustbin. Every user of batteries or accumulators is legally obliged to return old batteries and accumulators. You can do this free of charge at a retail outlet or other collection point in your area. You can obtain the addresses of suitable collection centres in your area from your city or local authority. For batteries that contain more than 0.0005 per cent mercury by mass, more than 0.002 per cent cadmium by mass or more than 0.004 per cent lead by mass, the chemical designations of the pollutant used can be found under the waste bin symbol. The chemical designations have the following meaning: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercuryFor commercial use, please observe the building regulations!
For commercial use, please observe the building regulations!
100 days of free returns
